How to mix the rubber material with all kinds of cooperating agents evenly?

In the process of rubber refining, the open refiner mainly relies on the two relative rotating rollers to produce extrusion and shear effect on the rubber, after many times of kneading, as well as kneading process accompanied by chemical action, the rubber internal macromolecule chain interruption, so that the formula of various components and mixing uniformly, and finally to achieve the purpose of refining rubber. From the gap between the rollers discharged film, due to the two rollers surface speed and temperature differences and wrapped in a roller, to return to the two rollers, so many times to complete the role of refining. In the plasticizing rubber molecular chain from long to short, elasticity from large to small; in the mixing to promote the surface of the components of the rubber material is constantly updated, uniform mixing. In the intermittent operation of the opener, after charging the rubber material repeatedly through the roller distance several times, and finally cut down the piece.
Used as a continuous operation of the opener, the rubber from one end of the roller continuous accession, according to the time specified in the rubber refining process repeatedly through the roller several times, from the other end of the roller continuous cutting of the required rubber strip.