Français
(1), mixing rubber in accordance with the specimen thickness required under the sheet, under the sheet must be ripe, stored in the rubber warehouse, placed in a flat, clean, dry metal plate cooled to
Room temperature (efficient management method is to pile up the refined rubber on the cart for free movement), and then parked for 22-24 hours under the condition of 23+/-2C, and prevent from moisture absorption. When the rubber needs to be reworked, it should be carried out according to the requirements of the roll pitch, roll temperature and rework time.
(2), storage of mixed rubber should be properly managed, otherwise there may be quality problems, such as mild scorching.
Rubber during storage, must control the temperature and shorten the storage time to avoid scorching. Issued and received rubber, should be registered into the account, in accordance with the order of use. Easy to burn or stock performance is not stable rubber material should be treated differently, not only should be stored separately, often turned over, in order to disseminate the internal heat in a timely manner, and should be used as soon as possible. Easy to scorch the rubber material every 2-3 days to turn over, the general rubber material every 6-7 days to turn over. For the return of the rubber, especially the edges of the material, to separate storage, not mixed with the original film. In terms of planning, it should be done accurately to reduce the backlog and shorten the cycle time. Summer temperature is high, especially pay attention to management. Commonly used cooling storage methods are: the use of isolation agents, cooling water refrigeration cycle; the establishment of underground glue library or air-conditioned glue library storage of glue; also available water curtain glue library, that is, the four walls of the glue library is equipped with a water spray pipe, the water sprayed to the sack piece to cool down.
In short, the storage should pay attention to the following points:: a, the glue warehouse to maintain ventilation, glue storage.
a, glue library to maintain ventilation, glue from direct sunlight, indoor temperature should be lower, pay attention to the summer cooling;
b, the rubber should not be stacked too high, and regularly turn over, in order to facilitate the dissemination of internal heat.
C. Storage time should not be too long.
Room temperature (efficient management method is to pile up the refined rubber on the cart for free movement), and then parked for 22-24 hours under the condition of 23+/-2C, and prevent from moisture absorption. When the rubber needs to be reworked, it should be carried out according to the requirements of the roll pitch, roll temperature and rework time.
(2), storage of mixed rubber should be properly managed, otherwise there may be quality problems, such as mild scorching.
Rubber during storage, must control the temperature and shorten the storage time to avoid scorching. Issued and received rubber, should be registered into the account, in accordance with the order of use. Easy to burn or stock performance is not stable rubber material should be treated differently, not only should be stored separately, often turned over, in order to disseminate the internal heat in a timely manner, and should be used as soon as possible. Easy to scorch the rubber material every 2-3 days to turn over, the general rubber material every 6-7 days to turn over. For the return of the rubber, especially the edges of the material, to separate storage, not mixed with the original film. In terms of planning, it should be done accurately to reduce the backlog and shorten the cycle time. Summer temperature is high, especially pay attention to management. Commonly used cooling storage methods are: the use of isolation agents, cooling water refrigeration cycle; the establishment of underground glue library or air-conditioned glue library storage of glue; also available water curtain glue library, that is, the four walls of the glue library is equipped with a water spray pipe, the water sprayed to the sack piece to cool down.
In short, the storage should pay attention to the following points:: a, the glue warehouse to maintain ventilation, glue storage.
a, glue library to maintain ventilation, glue from direct sunlight, indoor temperature should be lower, pay attention to the summer cooling;
b, the rubber should not be stacked too high, and regularly turn over, in order to facilitate the dissemination of internal heat.
C. Storage time should not be too long.
