What to pay attention to when using the mixer mixture?

The material must be full, or mixing pressure is not enough to achieve the desired mixing effect, but also not too full, or the pressure applied is difficult to compact the material. The speed of the rotor is in a suitable state, too small, can not achieve the effect of full mixing, and easily lead to uneven heating of the material, and localized overheating decomposition; rotational speed is too large, the shear effect may also lead to the material. Shear effect may also lead to the decomposition of the material, the rotor in the smelter is easy to overheat, and thus easy to lead to the decomposition of the material, and therefore the need to pass the right amount of cooling water into the rotor.
When used for rubber mixing, the mixing temperature should be lower than the vulcanization and cross-linking temperature, in order to avoid early vulcanization of rubber in the mixing machine. The machine is powerful, so burns and pressure injuries should be prevented.