Français
1, after starting the equipment, need to run for 5 minutes, after normal feeding production. When the opener starts to feed production, shorten the roll surface to feed on the side of the big traveling wheel, wait for the temperature to rise, and then expand the roll surface. After the temperature rises, expand the roller surface. Strictly prohibit brutal operation, overloading.
2、During the operation of the equipment, the moving parts cannot be adjusted or repaired. Machine operation shall not open the electric control] to adjust the electrical components, so as to avoid electric shock or cause damage to the electrical components. Damage. Often check the baffle plate, crossbar, pitch screws, refining machine size gear pins and so on.
3, the size of the volume of the roller must be based on equipment specifications and rubber formula reasonably determined (16-inch rubber refining machine capacity of 10kg raw rubber).
4, mixing between the two rollers to maintain a reasonable pile of rubber. Roller speed ratio of 1:1.14
5, pay attention to check the circulating water, to ensure that the roller temperature is below 60 ° C, mixing time is not less than 30 minutes.
6, pay attention to the charging order of small materials (solid softeners, activators, accelerators, anticorrosive agents, anti-coking agents, etc.) - large materials (carbon black filler, etc.) → liquid softeners → titanium dioxide, pigments. White powder, pigment.
7, strictly control the temperature of sulfur and double T; mixing uniformity of several elements: roller distance, temperature, thin through the number of times.
8, rubber refining process to wear overalls, and with good masks and other labor protection equipment, in strict accordance with the provisions of the operation, to avoid personal safety accidents. Rubber refining is completed After the completion of the work site should be cleaned up in a timely manner, so that the workplace and the machine to keep clean and clean.
2、During the operation of the equipment, the moving parts cannot be adjusted or repaired. Machine operation shall not open the electric control] to adjust the electrical components, so as to avoid electric shock or cause damage to the electrical components. Damage. Often check the baffle plate, crossbar, pitch screws, refining machine size gear pins and so on.
3, the size of the volume of the roller must be based on equipment specifications and rubber formula reasonably determined (16-inch rubber refining machine capacity of 10kg raw rubber).
4, mixing between the two rollers to maintain a reasonable pile of rubber. Roller speed ratio of 1:1.14
5, pay attention to check the circulating water, to ensure that the roller temperature is below 60 ° C, mixing time is not less than 30 minutes.
6, pay attention to the charging order of small materials (solid softeners, activators, accelerators, anticorrosive agents, anti-coking agents, etc.) - large materials (carbon black filler, etc.) → liquid softeners → titanium dioxide, pigments. White powder, pigment.
7, strictly control the temperature of sulfur and double T; mixing uniformity of several elements: roller distance, temperature, thin through the number of times.
8, rubber refining process to wear overalls, and with good masks and other labor protection equipment, in strict accordance with the provisions of the operation, to avoid personal safety accidents. Rubber refining is completed After the completion of the work site should be cleaned up in a timely manner, so that the workplace and the machine to keep clean and clean.
